Serie MTX Procesadores de matriz

MTX3
Mixing capability Mixing channels Mixing Channel : 8 Mono + 3 Stereo + 2 Effect Return + 8 Direct-in to Matrix/ Output Busses : 8 Mono
Input channel functions Mono CH : 3-band PEQ, Comp, Gate, Auto Gain Control, Feedback suppressor (only available in ch 1-4)/ Stereo CH: 3-band PEQ, Comp, Auto Gain Control
Output channel functions Room Delay, Room EQ, Speaker Processor, X-Over (1way,2way), Delay, 6-band PEQ, Limiter
I/O Phantom power +48V
Internal processing Priority Ducking, Ambient Noise Compensator
Sampling frequency rate Internal 48kHz/44.1kHz
Signal delay Less than 2.5ms (AD-DA @48kHz)
Total harmonic distortion Less than 0.05% (+4dBu, Gain:-6dB), Less than 0.1% (+4dBu, Gain:+66dB)
Frequency response 20Hz to 20kHz, +0.5dB, -1.5dB
Dynamic range 107dB (Gain:-6dB)
Hum & noise level Equivalent input noise -60dBu (Gain:+66dB), -83dBu (Gain:-6dB)
Crosstalk -100dB
Heat dissipation 43kcal/h max
Power requirements AC100V-240V 50Hz/60Hz
Power consumption 50W
Dimensions W 480mm (18.9")
H 44mm (1.7")
D 362mm (14.3")
Net weight 4.8kg (10.6lbs)
Others Memory bank : PRESET 50
  • * Total harmonic distortion is measured with a 18dB/Oct fi lter @80kHz.
  • * Hum & noise level is measured with a 6dB/oct fi lter @12.7kHz; equivalent to 20kHz fi lter with infi nite dB/Oct attenuation.

Analog Input Specifications

Input terminal GAIN Actual load impedance For use with nominal Input Level Connector
Nominal Max. before clip
INPUT 1-8 +66dB 10kΩ 50-600Ω Mics & 600Ω Lines -62dBu -42dBu Euroblock
-6dB +10dBu +30dBu
ST IN 1,2 - 10kΩ 600Ω Lines -10dBV +10dBV RCA Pin Jack

Analog Output Specifications

Output terminal Actual Source impedance For use with nominal Output Level Connector
Nominal Max. before clip
OUTPUT 1-8 75Ω 10kΩ Lines +4dBu +24dBu Euroblock

Digital Input and Output Specifications

Terminal Format Level IN/OUT Connector Note
YDIF In YDIF RS-422 16IN RJ45
YDIF Out YDIF RS-422 16OUT RJ45
Primary Dante 1000BASE-T 16IN/16OUT RJ45 MTX5-D Only
Secondary Dante 1000BASE-T 16IN/16OUT RJ45 MTX5-D Only

Control I/O Specifications

Terminal Level Connector
MTX3 GPI 8IN / 4OUT IN 1-7ch: 0V-5V
8ch: 2.5-24V : High, 2.5V or less, Allowable input +24V
Euroblock
OUT Open Collector
+V DC5V
Network 100Base-TX RJ-45
MTX5-D GPI 16 IN / 8 OUT IN 1-15ch : 0-5V
16ch : 2.5-24V : High, 2.5V or less, Allowable input +24V
Euroblock
OUT Open Collector
+V DC5V
MTX3 & MTX5-D REMOTE RS-232C (BAUD RATE : 38.4kbps or 115.2kbps) D-sub 9pin (Male)
DCP - RJ-45

Exi8/ Exo8 Specifications

  EXi8 EXo8
Sampling frequency 48kHz/44.1kH
Signal delay Less than 2.5ms
Total harmonic distortion Less than 0.05% (+4dBu , Gain:-6dB); less than 0.1% (+4dBu , Gain:+66dB)
Frequency response 20Hz to 20kHz, -1.5dB min, 0dB typ., +0.5dB max
Dynamic range 107dB (Gain:-6dB)
Equivalent input noise (EIN) -126dBu (Gain: +66dB)
Phantom power +48V (per channel; individually settable)
Crosstalk -100dB (@1kHz)
Heat dissipation (per hour) 21.5 kcal max.
Power supply voltage 100V 50/60Hz
Power consumption 25 W max.
Dimensions (W x H x D) 480(W) x 44(H) x 351(D)mm, 1U 480(W) x 44(H) x 351(D)mm, 1U
Included items Power cord, Euroblock plugs (3-pin, tabbed) x8

EXi8 Analog Input Specifications

Input terminal GAIN Actual load impedance For use with nominal Input Level Connector
Nominal Max. before clip
INPUT 1-8 +66dB 10kΩ 50-600Ω Mics & 600Ω Lines -62dBu -42dBu Euroblock
-6dB +10dBu +30dBu

EXi8 Digital Input Specifications

Terminal Format Level IN/OUT Connector
YDIF In YDIF RS-422 16IN RJ45

EXo8 Analog Output Specifications

Output terminal Actual Source impedance For use with nominal Output Level Connector
Nominal Max. before clip
OUTPUT 1-8 75Ω 10kΩ Lines +4dBu +24dBu Euroblock

EXo8 Digital Output Specifications

Terminal Format Level IN/OUT Connector
YDIF Out YDIF RS-422 16OUT RJ45

Exi8 / Exo8 Control I/O Specifications

Terminal Format Level Connector
Network Ethernet 100Base-TX - RJ-45