Serie MSP STUDIO
Powered for Uncompromised Quality
The trend towards choosing powered speakers for production monitoring is based on some very sound logic. By integrating and matching the power amplifiers and speakers, the relationship between them can be kept under perfect control for superior performance in the widest possible range of systems. Naturally the power amplifiers themselves are of the finest quality and, unlike component power amplifiers that must be designed for acceptable matching with the widest possible range of speakers, are designed and manufactured specifically to drive the system's woofer and tweeter in their specific enclosure. No matter where the MSP7 STUDIO monitors are used, and with what sources or other audio gear, you know that you're always receiving the benefits of a perfectly matched power amplifier and speaker system. You'll hear the difference. You'll also benefit from the convenience of not having to deal with external amplifiers and cabling.
Advanced Bi-amp Design
There are a number of advantages to multi-amp speaker setups, but the added cost and extra equipment required can make them impractical in many situations. With the MSP7 STUDIO everything you need is builtin - all you have to do is supply the line-level input. The 6.5 inch cone woofer is driven by an 80-watt power amplifier, while the 1 inch dome tweeter has its own 50-watt power amplifier. In the MSP7 STUDIO this particular power and driver combination results in the perfect balance between the low-mid and high frequency ranges. The frequency ranges are divided via a carefully designed electronic crossover before the power amplifier inputs, featuring steep 30-dB/octave roll-off curves in both the low- and high-pass filters. The steep roll-off minimizes inter-modulation between the frequency bands at the crossover point, achieving significantly smoother, cleaner crossover performance in the critical midrange. And the fact that the crossover is a linelevel electronic design completely eliminates the loss, distortion, and sometimes severe inter-modulation that are almost unavoidable in conventional passive crossover networks driven by a single power amplifier.
Details that Define Superior Performance
The MSP7 STUDIO woofer and tweeter units feature some important design innovations that contribute directly to improved sound quality. The 6.5 inch woofer, for example, features a specially treated polypropylene cone with lowdamping rubber surrounds for exceptionally smooth response. Low-reflection highrigidity die-cast magnesium baskets both maximize mechanical precision while minimizing unwanted coloration of the speaker's output. The 1 inch tweeters feature titanium domes that offer the perfect combination of light weight and rigidity for precise reproduction right up to 40 kHz. The tweeters have a powerful magnetic circuit that results in extremely fast response for crisp, natural transients, and are integrated with a waveguide that achieves uniform high frequency dispersion of 120 degrees. But precision manufacturing makes a huge contribution to performance as well as basic materials and design. The slightest eccentricity in the alignment of the tweeter domes and waveguides, for example, can seriously affect performance. So can the alignment of the coils and magnetic circuits. These are details that require a considerable investment of energy and resources to do properly, and they are exactly the details that make the MSP7 STUDIO the superior studio monitor that it is.
Magnetic Shielding That Won't Distort Your Sound
In today's production environment, which often includes computer and video displays as well as a range of magnetic media, magnetic shielding is essential. Conventional magnetic shielding schemes have the unfortunate side effect of distorting the magnetic flux of the speaker's critical magnetic circuit. The end result is distorted sound. This obstacle was effectively overcome in the MSP7 STUDIO with a new "advanced magnetic structure" that achieves effective shielding while maintaining the integrity of the speaker's magnetic circuit for significantly lower distortion as well as an improved definition.
One-piece Molded Enclosure with Rounded Baffle
Wood can be good, but synthetic materials have advanced to the point where they offer some overwhelming advantages. In addition to the fact that enclosures materials can be created with ideal density and resonance characteristics, they can be molded to almost any shape with precise tolerances. Where wood cabinets have glued joints that interrupt the continuity of the enclosure, the thick walled MSP7 STUDIO cabinet is molded in one piece, resulting in smooth acoustic transfer throughout the entire enclosure for superior reproduction precision. One-piece molding also makes it possible to produce the large-radius rounded baffle corners that help to maintain a natural wavefront and minimize diffraction for a smoother, more uniform polar response, as shown in the accompanying plots. Internal tweeter mounting also boosts high-frequency performance by eliminating spurious resonance from the tweeter frame.
Connectors and Controls
The MSP7 STUDIO features a balanced XLR-type connector for input. This provides direct compatibility with professional gear and allows the use of balanced lines for maximum audio quality even where long cable runs are required. Rear-panel controls include a continuous input sensitivity control, and trim switches that enable you to adjust the bass and treble in four and three positions, respectively (+1.5 dB/0 dB/-1.5 dB/-3 dB at 50 Hz and +1.5 dB/0 dB/-1.5 dB at 10 kHz), so that the system's response to be quickly matched to the room. There's also a low cut (FLAT, 80 Hz, 100 Hz) switch that is useful when the MSP7 STUDIO is used with the SW10 STUDIO subwoofer. The AC power cord is removable for easy transportation and setup.
Refined Looks for Refined Sound
The MSP7 STUDIO features a refined appearance that is a perfect match for its outstanding monitor performance. It is in fact "functional beauty" that results from an uncompromising approach to reproduction quality. The elegant rounded baffle has been primarily designed for superior dispersion characteristics, and is visually balanced by a high-efficiency rounded heat sink on the rear panel. The integral waveguide horn also contributes to outstanding sound while adding to the speaker's visual appeal. Some speakers are designed to look good. The MSP7 STUDIO has been designed throughout for superior sound, and looks great as a result.
Una opción ideal para estudios de proyectos pequeños
Al igual que MSP7 STUDIO más grande, MSP5 STUDIO es un sistema de bass-reflex biamplificado de dos vías que ofrece una excelente precisión de monitoreo para la reproducción digital o analógica en formato estéreo o surround. Las dimensiones más compactas del MSP5 STUDIO lo convierten en una opción ideal para estudios de proyecto más pequeños y sistemas de producción basados en DAW. El MSP5 STUDIO cuenta con un grave de cono de 5 pulgadas controlado por un amplificador de 40 vatios y un agudo de cúpula de 1 pulgada controlado por un amplificador de 27 vatios. Además del tamaño del grave, el tamaño de la carcasa y la potencia del amplificador, MSP5 STUDIO aprovecha los mismos materiales avanzados y tecnología de diseño que están detrás del rendimiento extraordinario del MSP7 STUDIO. El altavoz de graves y agudos de cúpula de titanio presentan estructuras magnéticas avanzadas que logran una distorsión excepcionalmente baja, y el agudo funciona con una bocina de guía de onda única que logra una dispersión de alta frecuencia amplia y uniforme de más de 120 grados para un equilibrio óptimo independientemente de la posición de escucha. El diseño avanzado de la carcasa y el controlador, incluido el deflector redondeado de baja difracción, también garantiza una dispersión uniforme y uniforme en toda la gama de reproducción del sistema. La respuesta de frecuencia plana a 40 kHz hace que el MSP5 STUDIO sea ideal para la masterización, donde la alta velocidad de muestreo y de bits es la norma.
Cajas blindadas magnéticamente
Junto con su tamaño compacto y su excelente rendimiento, el blindaje magnético completo permite que los altavoces MSP5 STUDIO se coloquen cerca de todos los tipos de equipos de audio, video y ordenadores sin degradación del sonido o efectos negativos en los equipos circundantes.
Conectividad
El MSP5 STUDIO tiene una entrada de tipo XLR balanceada para compatibilidad directa con equipos profesionales. Las líneas balanceadas son ideales si los altavoces se colocan al final de largos tramos de cables que, si no están equilibrados, podrían ser susceptibles a zumbidos y ruidos inducidos. El MSP5 STUDIO también ofrece un conector jack de 1/4 "no balanceado.
Interruptores de ajuste para una fácil combinación de habitaciones
El MSP5 STUDIO está equipado con interruptores de ajuste de cuatro posiciones bajas y tres posiciones altas que permiten optimizar la respuesta del sistema para una amplia gama de entornos acústicos.
Designed for Optimum Matching With the MSP Series Powered Monitor Speakers
The SW10 STUDIO subwoofer has been designed specifically for optimum matching with the MSP series powered monitor speakers. Combined with MSP7 STUDIO or MSP5 STUDIO speakers in a stereo or surround system it can provide a seamlessly extended low end for accurate ultra wide range monitoring. A comprehensive selection of inputs and outputs as well as a phase switch and continuous high-cut and level controls make it easy to achieve optimum performance in any room and system. Whether you're simply mixing basic stereo programs or authoring DVD audio in full surround, MSP STUDIO series speakers plus an SW10 STUDIO will give you the ultimate monitoring experience.
