MRX7-D

Encuentra tu tienda

		MRX7-D
General specifications
Sampling frequency rate	Internal	48kHz/44.1kHz
Signal delay		1.9 msec (AD-DA @48kHz)
Total harmonic distortion		“0.05% (+4dBu, Gain:-6dB, 48kHz) 0.1% (+4dBu, Gain: +66dB, 48kHz)” (Measured with a 18dB/Oct filter @80kHz)
Frequency response		20Hz to 20kHz: max:+0.5dB, min:-1.5dB
Dynamic range		107dB (typ. Gain:-6dB)
Crosstalk		-100dB (@1kHz)
Heat dissipation		55.9kcal/h max
Power requirements		AC100V-240V 50Hz/60Hz
Power consumption		65W
Dimensions	W	480mm
	H	88mm
	D	366mm
Net weight		6.5kg
Accessorios		Included items = Power cord, Euroblock plugs (3-pin, tabbed) x16, Euroblock plugs (16-pin) x2, Cable Ties, Manual
Others		Memory bank = PRESET: 50, Phantom Power = +48V

Analog Input Specifications

Input terminal	GAIN	Actual load impedance	For use with nominal	Input Level		Connector	Balanced / Unbalanced
Input terminal	GAIN	Actual load impedance	For use with nominal	Nominal	Max. before clip	Connector	Balanced / Unbalanced
INPUT 1-8	+66dB	10kΩ	50-600Ω Mics	-62dBu(0.616mV)	-42dBu(6.16mV)	Euroblock(5.08mm pitch)	Balanced
INPUT 1-8	-6dB	10kΩ	600ΩLines	+10dBu(2.45V)	+30dBu(24.5V)	Euroblock(5.08mm pitch)	Balanced
ST IN 1,2	-	10kΩ	600Ω Lines	-10dBV(316mV)	+10dBV(3.16V)	RCA Pin Jack	Unbalanced

* In these specifications, 0dBu = 0.775 Vrms., 0dBV = 1.00 Vrms.
* All input AD converters are 24bit linear, 128times oversampling.
* +48V DC ( phantom power ) is supplied to INPUT EUROBLOCK connectors via each individual software controlled switch.

Analog Output Specifications

Output terminal	Actual Source impedance	For use with nominal	Output Level		Connector	Balanced / Unbalanced
Output terminal	Actual Source impedance	For use with nominal	Nominal	Max. before clip	Connector	Balanced / Unbalanced
OUTPUT 1-8	75Ω	10kΩLines	+4dBu(1.23V)	+24dBu(12.3V)	Euroblock(5.08mm pitch)	Balanced

* In these specifications, 0dBu = 0.775 Vrms.
*All output DA converters are 24bit, 128times oversampling.(Fs=48kHz)

Digital Input and Output Specifications

Terminal	Format	Level	IN/OUT	Connector
YDIF In	YDIF	RS-422	16IN	RJ45
YDIF Out	YDIF	RS-422	16OUT	RJ45
Primary / Secondary	Dante	1000BASE-T	64IN/64OUT	RJ45

Control I/O Specifications

Terminal		Level	Connector
GPI 16IN / 8OUT	IN	0V-5V (IN 16 L(0V-2.5V) / H(2.5V-24V))	Euroblock
	OUT	Open Collector
	+V	DC5V
REMOTE		RS-232C (BAUD RATE : 38.4kbps or 115.2kbps)	D-sub 9pin (Male)
DCP		-	RJ-45