MMP1 Sistema de gestión de monitorización

		MMP1
General specifications
Power requirements		US/Canada: 120V 60Hz, Japan: 100V 50/60Hz, China: 110 – 240V 50/60Hz, Korea: 220V 60Hz, Other: 110 – 240V 50/60Hz (MAIN AC INPUT), 12V-14.8V, 4A (BACKUP DC INPUT)
Power consumption		45W
Dimensions	W	480 mm (18.90”)
	H	88 mm (3.46”)
	D	368 mm (14.49”)
Net weight		7.0 kg (15.43 lb)
Accessorios		Power cable, Rubber stoppers (4)
Operating temperature		0 – 40˚C
Storage temperature		-20 – 60˚C

Signal Processing

Monitor Matrix	(32 inputs + 8 DSP channel inputs) x (32 outputs + stereo downmix outputs + stereo headphone outputs) @44.1, 48, 88.2, and 96kHz
Monitor Matrix	20 inputs x 20 outputs @176.4 and 192 kHz
Speaker Matrix	32 inputs x 32 outputs @44.1, 48, 88.2, and 96kHz
Speaker Matrix	16 inputs x 16 outputs @176.4 and 192 kHz
Bass Management Crossover Filter	LPF 80Hz / HPF 80Hz
Time Alignment Delay	Up to 30msec
Room EQ	6-band parametric EQ
Lip Sync Delay	Up to 50msec
Channel Strip	Comp260, EQ (Precise, Aggressive, Smooth, Legacy)
Scenes	20 Scenes
Snapshots	20 Snapshots

Electrical Characteristics

Sampling Frequency	Internal	44.1kHz/48kHz/88.2kHz/96kHz/176.4kHz/192kHz
Sampling Frequency	External	44.1kHz/48kHz/88.2kHz/96kHz/176.4kHz/192kHz, ±200ppm
Analog Input/Output	Frequency Response	±0.5dB, 20Hz-20kHz
	THD+N	0.0031%, A-weighted, +4dB@20Hz-20kHz, GAIN:0dB, Fs=192kHz
	Dynamic Range	110dB, A-weighted
	Crosstalk@1kHz	-100dB

Analog Input Characteristics

Input Terminals	Actual Load Impedance	For Use With Nominal	Input Level		Connector	Balanced / Unbalanced
Input Terminals	Actual Load Impedance	For Use With Nominal	Nominal	Max. before clip	Connector	Balanced / Unbalanced
ANALOG INPUT 1-8	20KΩ	150Ω Lines	+4dBu(1.23V)	+24dBu(12.28V)	D-SUB Connector 25P (Female)	Balanced
ANALOG INPUT 1-8	10KΩ	600Ω Lines	-10dBV(0.32V)	+10dBV(3.16V)	D-SUB Connector 25P (Female)	Unbalanced

Analog Output Characteristics

Output Terminals	Actual Source Impedance	For Use With Nominal	Output Level		Connector	Balanced / Unbalanced
Output Terminals	Actual Source Impedance	For Use With Nominal	Nominal	Max. before clip	Connector	Balanced / Unbalanced
ANALOG OUTPUT 1-8	75Ω(BAL)	10kΩ Lines	+4dBu(1.23V)	+24dBu(12.28V)	D-SUB Connector 25P (Female)	Balanced
ANALOG OUTPUT 1-8	75Ω(BAL)	10kΩ Lines	-2dBu(0.62V)	+18dBu(6.16V)	D-SUB Connector 25P (Female)	Balanced

Digital Input & Output Characteristics (AES/EBU)

Terminal	Format	Data length	Level	Connector	Balanced / Unbalanced
AES/EBU 1-16	AES/EBU	24bit	RS422	D-SUB Connector 25P (Female)	Balanced

Digital Input & Output Characteristics (Dante)

Terminal	Format	Data length	Level	Audio	Connector
Primary/Secondary	Dante	24bit	1000Base-T	64ch in/out @48kHz 32ch in/out @96kHz 16ch in/out @192kHz	etherCON x 2

Control I/O Characteristics

Terminal		Format	Level	Connector	Balanced / Unbalanced
GPI	IN	-	-	D-SUB Connector 25P (Female)	-
GPI	OUT	-	-	D-SUB Connector 25P (Female)	-
WORD CLOCK	IN	-	TTL/75Ω terminated	BNC	-
WORD CLOCK	OUT	-	TTL/75Ω	BNC	-

External DC Input Characteristics

Terminal	Connector
BACKUP DC INPUT	XLR-4-32 type