SWR2311P-10G Firmware V2.02.17 (Previous version)
Important Notice
How to update the firmware
For details, please refer to the "Yamaha LAN Monitor User Guide" and the help of Web GUI.
- Connect the SWR2311P-10G and the computer with LAN cables. Please connect with the port set as VLAN 1 of SWR2311P-10G.
- Start the Yamaha LAN Monitor.
- Select the SWR2311P-10G for update at tree view.
- Click the [Web GUI] button on the device detail view. With the factory settings, the user name and password are not specified, so it is not necessary to enter a user name and password.
- Select [Management] -> [Maintenance] -> [Update firmware], then click [Next] button on "Update firmware from PC."
- Click the [Select a file] button, then select the firmware file of extension .bin downloaded and decompressed.
- Click the [OK] button.
- Click the [Execute] button.
Wait until completing the update. SWR2311P-10G automatically restarts and becomes ready to use.
Main Revisions and Enhancements
New Functions
- The following devices are supported by L2MS.
- SWR2310-10G/18GT/28GT/52GT
- Supports RADIUS servers.
- Supports SMTPS and SMTP authentication by the email notification function.
- Supports inter-VLAN routing.
Enhancements
- Expanded the number of slaves managed by L2MS from 64 to 128.
- Reduced the CPU load when saving logs. Since the internal operation of log saving has changed, the logs in the RAM area of the main unit may not be in chronological order when the firmware is revised down.
- Supports the following for the configuration file control by TFTP.
- Enables automatic restart when the startup config is updated.
- Enables import and export of all settings of startup config. The remote paths are as follows.
- startup-config #0 All settings : config0-all
- startup-config #1 All settings : config1-all
- startup-config #2 All settings : config2-all
- startup-config #3 All settings : config3-all
- startup-config #4 All settings : config4-all
- The remote path for all the settings of Startup Config in the SD card is as follows.
- startup-config #SD config.txt : configsd
- startup-config #SD All settings : configsd-all
- Enables automatic adjustment of the vertical axis of the traffic information graph between 10 kbps and 10 Gbps on the dashboard of the Web GUI.
- Enables applying of the access list to the OUT direction of the VLAN interface in [Access List] in the detailed settings of Web GUI.
- Enables setting the tagged VLAN of the logical interface in [VLAN] of the detailed settings of Web GUI.
- Made the following changes in [Maintenance] -> [CONFIG management] in [Management] of Web GUI.
- Supports import and export of all settings.
- Enabled selection of the config surface when importing or exporting.
- Changed the file name when exporting the config of the L2MS slave device from "slave-config" to "l2ms-slave-config."
- Error checking has been enhanced for importing and exporting configs.
Fixed Bugs
- Fixed a problem that a memory leak would occur if the L2MS function was disabled in the state of LAN map warning detected during operating as an L2MS master.
- Fixed a problem in which restart was executed when a large number of SNMP packets were received.
- Fixed a problem in which the ARP table was not updated in the Spanning Tree when a topology change had occurred and communication could have been temporarily disabled, depending on the configuration.
- Fixed a problem in which, when in Spanning Tree, the device may end abnormally if the shutdown by BPDU guard and the recovery by auto recovery have been repeated.
- Fixed a problem in which the automatic recovery setting of BPDU guard was invalid after rebooting in the spanning tree error detection function.
- Fixed a problem in which the IGMP/MLD snooping settings remained in the running config even if the VLAN was deleted.
- Fixed a problem in which entries of ARP table or IPv6 Neighbor table may have been illegally overwritten by the following operations when multiple static ARPs or static IPv6 Neighbors were registered to one VLAN.
- Fixed a problem in which the running config would not be applied correctly even if it was set by TFTP.
- Fixed a problem in which unnecessary error logs would be output when DHCP Offer was received from multiple DHCP servers.
- Fixed a problem in which packets with different port numbers would also meet the conditions even if a policy map including a port number specification was applied to an interface in QoS.
- Fixed some other minor problems.
Acuerdo de licencia y archivo de descarga
PLEASE READ THIS SOFTWARE LICENSE AGREEMENT ("AGREEMENT") CAREFULLY BEFORE USING THIS SOFTWARE. YOU ARE ONLY PERMITTED TO USE THIS SOFTWARE PURSUANT TO THE TERMS AND CONDITIONS OF THIS AGREEMENT.
BY DOWNLOADING, INSTALLING, COPYING, OR OTHERWISE USING THIS SOFTWARE YOU ARE AGREEING TO BE BOUND BY THE TERMS OF THIS LICENSE. IF YOU DO NOT AGREE WITH THE TERMS, DO NOT DOWNLOAD, INSTALL, COPY, OR OTHERWISE USE THIS SOFTWARE. IF YOU HAVE DOWNLOADED OR INSTALLED THE SOFTWARE AND DO NOT AGREE TO THE TERMS, PROMPTLY ABORT USING THE SOFTWARE.
1. GRANT OF LICENSE AND COPYRIGHT
Subject to the terms and conditions of this Agreement, Yamaha hereby grants you a non-transferable license to use copy(ies) of the software program(s) and data ("SOFTWARE") accompanying this Agreement, only on a computer, smartphone, musical instrument or equipment item that you yourself own or manage. The term SOFTWARE shall encompass any updates to the accompanying software and data. The SOFTWARE is owned by Yamaha and/or Yamaha's licensor(s), and is protected by relevant copyright laws and all applicable treaty provisions. While you are entitled to claim ownership of the storage media in which the SOFTWARE is stored and the data created with the use of SOFTWARE, the SOFTWARE will continue to be protected under relevant copyrights.
2. RESTRICTIONS
- You may not engage in reverse engineering, disassembly, decompilation or otherwise deriving a source code form of the SOFTWARE by any method whatsoever.
- You may not reproduce, modify, change, rent, lease, or distribute the SOFTWARE in whole or in part, or create derivative works of the SOFTWARE.
- You may not electronically transmit the SOFTWARE from one computer to another or share the SOFTWARE in a network with other computers.
- You may not use the SOFTWARE to distribute illegal data or data that violates public policy.
- You may not initiate services based on the use of the SOFTWARE without permission by Yamaha Corporation.
- You may not use the SOFTWARE in any manner that might infringe third party copyrighted material or material that is subject to other third party proprietary rights, unless you have permission from the rightful owner of the material or you are otherwise legally entitled to use.
- You may not engage in any act that are against the law, public order and morals.
Copyrighted data, including but not limited to MIDI data for songs, used by or obtained by means of the SOFTWARE, are subject to the following restrictions which you must observe.
- Data received by means of the SOFTWARE may not be used for any commercial purposes without permission of the copyright owner.
- Data received by means of the SOFTWARE may not be duplicated, transferred, or distributed, or played back or performed for listeners in public without permission of the copyright owner.
- The encryption of data received by means of the SOFTWARE may not be removed nor may the electronic watermark be modified without permission of the copyright owner.
3. TERM
This Agreement becomes effective on the day that you agree with this Agreement and remains effective until terminated. If any copyright law or provision of this Agreement is violated, this Agreement shall terminate automatically and immediately without notice from Yamaha. Upon such termination, you must immediately abort using the SOFTWARE and destroy any accompanying written documents and all copies thereof.
4. DISCLAIMER OF WARRANTY ON SOFTWARE
YOU EXPRESSLY ACKNOWLEDGE AND AGREE THAT USE OF THE SOFTWARE IS AT YOUR SOLE RISK. THE SOFTWARE AND RELATED DOCUMENTATION ARE PROVIDED "AS IS" AND WITHOUT WARRANTY OF ANY KIND. NOTWITHSTANDING ANY OTHER PROVISION OF THIS AGREEMENT, YAMAHA EXPRESSLY DISCLAIMS ALL WARRANTIES AS TO THE SOFTWARE, EXPRESS, AND IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY RIGHTS. SPECIALLY, BUT WITHOUT LIMITING THE FOREGOING, YAMAHA DOES NOT WARRANT THAT THE SOFTWARE WILL MEET YOUR REQUIREMENTS, THAT THE OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR-FREE, OR THAT DEFECTS IN THE SOFTWARE WILL BE CORRECTED.
5. LIMITATION OF LIABILITY
EXCEPT WHEN THE DAMAGE INCURRED DUE TO ANY CAUSE ATTRIBUTABLE TO YAMAHA, YAMAHA'S ENTIRE OBLIGATION HEREUNDER SHALL BE TO PERMIT USE OF THE SOFTWARE UNDER THE TERMS HEREOF. EXCEPT WHEN THE DAMAGE INCURRED DUE TO ANY CAUSE ATTRIBUTABLE TO YAMAHA, IN NO EVENT SHALL YAMAHA BE LIABLE TO YOU OR ANY OTHER PERSON FOR ANY DAMAGES, INCLUDING, WITHOUT LIMITATION, ANY DIRECT, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, EXPENSES, LOST PROFITS, LOST DATA OR OTHER DAMAGES ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE THE SOFTWARE, EVEN IF YAMAHA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. EVEN IF YAMAHA IS LIABLE, EXCEPT IN CASE OF WILLFUL MISCONDUCT OR GROSS NEGLIGENCE BY YAMAHA, YAMAHA'S TOTAL LIABILITY TO YOU FOR ALL DAMAGES, LOSSES AND CAUSES OF ACTION (WHETHER IN CONTRACT, TORT OR OTHERWISE) SHALL BE LIMITED TO DIRECT OR GENERAL DAMAGES AND SHALL NOT INCLUDE INDIRECT, INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES, EXPENSES, LOST PROFITS, LOST DATA OR OTHER DAMAGES, AND IN NO EVENT SHALL YAMAHA'S TOTAL LIABILITY TO YOU FOR ALL DAMAGES EXCEED THE AMOUNT PAID FOR THE PRODUCT USED WITH THE SOFTWARE.
6. OPEN SOURCE SOFTWARE
This SOFTWARE may include the software or its modifications which include any open source licenses, including but not limited to GNU General Public License or Lesser General Public License ("OPEN SOURCE SOFTWARE"). Your use of OPEN SOURCE SOFTWARE is subject to the license terms specified by each rights holder. If there is a conflict between the terms and conditions of this Agreement and each open source license, the open source license terms will prevail only where there is a conflict.
7. THIRD PARTY SOFTWARE AND SERVICE
Third party software, service and data ("THIRD PARTY SOFTWARE") may be attached to the SOFTWARE. IF, in the written materials or the electronic data accompanying the software, Yamaha identifies any software and data as THIRD PARTY SOFTWARE, you acknowledge and agree that you must abide by the terms of any agreement provided with the THIRD PARTY SOFTWARE and that the party providing the THIRD PARTY SOFTWARE is responsible for any warranty or liability related to or arising from the THIRD PARTY SOFTWARE. Yamaha is not responsible in any way for the THIRD PARTY SOFTWARE or your use thereof.
- Yamaha provides no express warranties as to the THIRD PARTY SOFTWARE. IN ADDITION, YAMAHA EXPRESSLY DISCLAIMS ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, as to the THIRD PARTY SOFTWARE.
- Yamaha shall not provide you with any service or maintenance as to the THIRD PARTY SOFTWARE.
Yamaha is not liable to you or any other person for any damages, including, without limitation, any direct, indirect, incidental or consequential damages, expenses, lost profits, lost data or other damages arising out of the use, misuse or inability to use the THIRD PARTY SOFTWARE.
U.S. GOVERNMENT RESTRICTED RIGHTS NOTICE:
The Software is a “commercial item,” as that term is defined at 48 C.F.R. 2.101 (Oct 1995), consisting of “commercial computer software” and “commercial computer software documentation,” as such terms are used in 48 C.F.R. 12.212 (Sept 1995). Consistent with 48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.72024 (June 1995), all U.S. Government End Users shall acquire the Software with only those rights set forth herein.
8. CHANGE OR END OF SOFTWARE
- Yamaha may change the specification of the Software without notice to you.
- Yamaha may end the supply or support of the Software without notice to you when Yamaha determines that it is difficult to continue supply of the Software accompanied by the end of manufacturing or sales of the products or service applicable to Software.
9. AMENDMENT
- Yamaha may at its discretion amend, revise, or update this Agreement.
- When Yamaha amends, revises, or updates this Agreement, Yamaha obtains your consent to the updated terms of this Agreement, or Yamaha specifies the amendment contents and the effective date and posts them on Yamaha's Website within a reasonable period of time before the effective date.
- You may terminate this Agreement before the effective date in accordance with the way that Yamaha specifies if you don't agree with the amendment of this Agreement.
10. GENERAL
This Agreement shall be interpreted according to and governed by Japanese law without reference to principles of conflict of laws. Any dispute or procedure shall be heard before the Tokyo District Court in Japan. If for any reason a court of competent jurisdiction finds any portion of this Agreement to be unenforceable, the remainder of this Agreement shall continue in full force and effect. All legal notices, notice of disputes and demands for arbitration, and any other notice which purports to change these provisions or to assert legal entitlements must be sent in writing to:
Yamaha Corporation
10-1, Nakazawa-cho, Chuo-ku, Hamamatsu, Shizuoka, 430-8650, Japan
11. ENTIRE AGREEMENT
This Agreement constitutes the entire agreement between the parties with respect to use of the SOFTWARE and any accompanying written materials and supersedes all prior or contemporaneous understandings or agreements, written or oral, regarding the subject matter of this Agreement.
Last updated: July 10, 2024
También necesitas
Manuales de instalación
- SWR2311P-10G Owner's Manual [English]
- SWR2311P-10G取扱説明書
- SWR2311P-10G Owner's Manual [Deutsch]
- SWR2311P-10G Owner's Manual [Español]
- SWR2311P-10G Owner's Manual [Français]
- SWR2311P-10G Owner's Manual [Italiano]
- SWR2311P-10G Owner's Manual [Русский]
- SWR2311P-10G Command Reference
- SWR2311P-10G コマンドリファレンス
- SWR2311P-10G Technical Data
- SWR2311P-10G技術資料
Versiones anteriores
SWR2311P-10G Firmware
- Previous versions information
- SWR2311P-10G Firmware V2.02.30
- SWR2311P-10G Firmware V2.02.29
- SWR2311P-10G Firmware V2.02.27
- SWR2311P-10G Firmware V2.02.22
- SWR2311P-10G Firmware V2.02.17
- SWR2311P-10G Firmware V2.02.14
- SWR2311P-10G Firmware V2.02.13
- SWR2311P-10G Firmware V2.02.11
- SWR2311P-10G Firmware V2.02.09