SWP2 Firmware V2.03.06 (Previous version)
Important Notice
How to update the firmware
For details, please refer to the "Yamaha LAN Monitor User Guide" and the help of Web GUI.
- Connect the SWP2 and the computer with LAN cables.
Please connect with the port set as VLAN 1 of SWP2. - Start the Yamaha LAN Monitor.
- Select the SWP2 for update at tree view.
- Click the [Web GUI] button on the device detail view.
With the factory settings, a user name is “administrator” and a password is (blank). - Select [Management]→[Maintenance]→[Update firmware], then click [Next] button on "Update firmware from PC."
- Click the [Select a file] button, then select the firmware file of extension .bin downloaded and decompressed.
- Click the [OK] button.
- Click the [Execute] button.
Wait until completing the update. SWP2 automatically restarts and becomes ready to use.
Main Revisions and Enhancements
V2.03.06
Vulnerability Responses
- Addressed the following vulnerability issues:
- Addressed the following SSL v3 vulnerability issues:
New Functions
- Now supports multiple VLAN function.
- Now supports MLD Snooping function.
- Added a command to control whether EAP frames can be forwarded or not.
- The following pages have been added to the WebGUI detailed settings.
“Creating an access list”
“Apply access list” - When a switch works as the querier while the IGMP snooping function and spanning tree are enabled, if a route change occurs due to cable disconnection, etc., a query will be sent immediately regardless of the query interval setting. This will resume the Dante multicast flow transmission shortly.
Enhancements
- The contents displayed by the “show interface brief” command have been optimized.
- The following changes were made in port authentication.
- Supports dynamic VLAN in multi-supplicant mode.
- Supports logical interface (Static and LACP).
- Supports trunk port.
- Added the status of the custom file for Web authentication to the execution result of the “show auth status” command.
- Policy map can be applied to link aggregation logical interface by QoS.
- The following settings of QoS can be changed with link aggregation logical interfaces.
- Trust mode.
- Default CoS value.
- Port priority
- Access list can be applied to received frames of link aggregation logical interfaces by the ACL function.
- The interface specification option of the “clear ip igmp snooping group” command has been removed.
- The following changes were made in the WebGUI detailed settings.
- Enabled to configure link aggregation logical interfaces in “QoS.”
- When assigning LAN / SFP ports to the link aggregation logical interface in "Link aggregation," the QoS settings of each port are automatically unified.
- VLAN PRESET NORMAL disabled port 11 and 12 link aggregation and enabled spanning tree instead.
- The frame buffer size allocated per port has been increased to make it difficult for packets to be dropped when burst traffic occurs.
Fixed bugs
- Fixed a problem in which if you continue to access the WebGUI via HTTPS, you would not be able to log in to the WebGUI.
- Fixed a problem in which an unnecessary error log is output under the following conditions:
- When disabling spanning tree on a port basis
- When the VLAN interface to which the logical interface belongs is linked up or down
- When creating or deleting a logical interface
- When the multicast receiver end reception with the IGMP Snooping function
- Fixed a problem when IGMP Snooping related commands are configured in the IGMP Snooping function, an error may occur when executing the “ip igmp snooping disable” command.
- Fixed a problem when IGMP Snooping is disabled in the IGMP Snooping function, IGMP packets are not forwarded.
- Fixed a problem in which in the IGMP Snooping function, when there are multiple receiving terminals for one multicast, the multicast is not flooded even if all terminals have finished receiving.
- Fixed a problem where packets were not correctly prioritized by QoS.
- Fixed a problem in which the Trust Mode setting of the interface to which the policy map is applied may not be applied when it is restarted.
- Fixed a problem in which IGMP frames loop even if loop detection is enabled.
- Fixed a problem in which an authentication screen might not be displayed by Web authentication.
- Fixed a problem that caused packet drops in communication between ports with different communication speeds.
- Fixed the following problems in the WebGUI dashboard:
- "Port blocked" was displayed when shutting down a port with loop detection.
- Fixed the following problems in the WebGUI detailed settings:
- In the tag VLAN screen, the combo port on the SFP side that was the uplink cannot be set as a trunk port.
- The error message was not displayed when selecting combo port with uplink in tag VLAN screen.
- Fixed a problem in which when the VTY port in use was invalidated, the corresponding console terminal would not terminate.
- Fixed a problem in which some Dante devices were not displayed in Yamaha LAN Monitor.
- Fixed some other minor problems.
Acuerdo de licencia y archivo de descarga
PLEASE READ THIS SOFTWARE LICENSE AGREEMENT ("AGREEMENT") CAREFULLY BEFORE USING THIS SOFTWARE. YOU ARE ONLY PERMITTED TO USE THIS SOFTWARE PURSUANT TO THE TERMS AND CONDITIONS OF THIS AGREEMENT. THIS AGREEMENT IS BETWEEN YOU (AS AN INDIVIDUAL OR LEGAL ENTITY) AND YAMAHA CORPORATION ("YAMAHA").
BY DOWNLOADING, INSTALLING, COPYING, OR OTHERWISE USING THIS SOFTWARE YOU ARE AGREEING TO BE BOUND BY THE TERMS OF THIS LICENSE. IF YOU DO NOT AGREE WITH THE TERMS, DO NOT DOWNLOAD, INSTALL, COPY, OR OTHERWISE USE THIS SOFTWARE. IF YOU HAVE DOWNLOADED OR INSTALLED THE SOFTWARE AND DO NOT AGREE TO THE TERMS, PROMPTLY ABORT USING THE SOFTWARE.
1. GRANT OF LICENSE AND COPYRIGHT
Subject to the terms and conditions of this Agreement, Yamaha hereby grants you a license to use copy(ies) of the software program(s) and data ("SOFTWARE") accompanying this Agreement, only on a computer, musical instrument or equipment item that you yourself own or manage. The term SOFTWARE shall encompass any updates to the accompanying software and data. While ownership of the storage media in which the SOFTWARE is stored rests with you, the SOFTWARE itself is owned by Yamaha and/or Yamaha's licensor(s), and is protected by relevant copyright laws and all applicable treaty provisions. While you are entitled to claim ownership of the data created with the use of SOFTWARE, the SOFTWARE will continue to be protected under relevant copyrights.
2. RESTRICTIONS
- You may not engage in reverse engineering, disassembly, decompilation or otherwise deriving a source code form of the SOFTWARE by any method whatsoever.
- You may not reproduce, modify, change, rent, lease, or distribute the SOFTWARE in whole or in part, or create derivative works of the SOFTWARE.
- You may not electronically transmit the SOFTWARE from one computer to another or share the SOFTWARE in a network with other computers.
- You may not use the SOFTWARE to distribute illegal data or data that violates public policy.
- You may not initiate services based on the use of the SOFTWARE without permission by Yamaha Corporation.
- You may not use the SOFTWARE in any manner that might infringe third party copyrighted material or material that is subject to other third party proprietary rights, unless you have permission from the rightful owner of the material or you are otherwise legally entitled to use.
Copyrighted data, including but not limited to MIDI data for songs, obtained by means of the SOFTWARE, are subject to the following restrictions which you must observe.
- Data received by means of the SOFTWARE may not be used for any commercial purposes without permission of the copyright owner.
- Data received by means of the SOFTWARE may not be duplicated, transferred, or distributed, or played back or performed for listeners in public without permission of the copyright owner.
- The encryption of data received by means of the SOFTWARE may not be removed nor may the electronic watermark be modified without permission of the copyright owner.
3. TERMINATION
This Agreement becomes effective on the day that you receive the SOFTWARE and remains effective until terminated. If any copyright law or provision of this Agreement is violated, this Agreement shall terminate automatically and immediately without notice from Yamaha. Upon such termination, you must immediately abort using the SOFTWARE and destroy any accompanying written documents and all copies thereof.
4. DISCLAIMER OF WARRANTY ON SOFTWARE
If you believe that the downloading process was faulty, you may contact Yamaha, and Yamaha shall permit you to re-download the SOFTWARE, provided that you first destroy any copies or partial copies of the SOFTWARE that you obtained through your previous download attempt. This permission to re-download shall not limit in any manner the disclaimer of warranty set forth in Section 5 below.
You expressly acknowledge and agree that use of the SOFTWARE is at your sole risk. The SOFTWARE and related documentation are provided "AS IS" and without warranty of any kind. NOTWITHSTANDING ANY OTHER PROVISION OF THIS AGREEMENT, YAMAHA EXPRESSLY DISCLAIMS ALL WARRANTIES AS TO THE SOFTWARE, EXPRESS, AND IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY RIGHTS. SPECIALLY, BUT WITHOUT LIMITING THE FOREGOING, YAMAHA DOES NOT WARRANT THAT THE SOFTWARE WILL MEET YOUR REQUIREMENTS, THAT THE OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR-FREE, OR THAT DEFECTS IN THE SOFTWARE WILL BE CORRECTED.
5. LIMITATION OF LIABILITY
YAMAHA'S ENTIRE OBLIGATION HEREUNDER SHALL BE TO PERMIT USE OF THE SOFTWARE UNDER THE TERMS HEREOF. IN NO EVENT SHALL YAMAHA BE LIABLE TO YOU OR ANY OTHER PERSON FOR ANY DAMAGES, INCLUDING, WITHOUT LIMITATION, ANY DIRECT, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, EXPENSES, LOST PROFITS, LOST DATA OR OTHER DAMAGES ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE THE SOFTWARE, EVEN IF YAMAHA OR AN AUTHORIZED DEALER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. In no event shall Yamaha's total liability to you for all damages, losses and causes of action (whether in contract, tort or otherwise) exceed the amount paid for the SOFTWARE.
6. OPEN SOURCE SOFTWARE
This SOFTWARE may include the software or its modifications which include any open source licenses, including but not limited to GNU General Public License or Lesser General Public License ("OPEN SOURCE SOFTWARE"). Your use of OPEN SOURCE SOFTWARE is subject to the license terms specified by each rights holder. If there is a conflict between the terms and conditions of this Agreement and each open source license, the open source license terms will prevail only where there is a conflict.
7. THIRD PARTY SOFTWARE AND SERVICE
Third party software, service and data ("THIRD PARTY SOFTWARE") may be attached to the SOFTWARE. IF, in the written materials or the electronic data accompanying the software, Yamaha identifies any software and data as THIRD PARTY SOFTWARE, you acknowledge and agree that you must abide by the terms of any agreement provided with the THIRD PARTY SOFTWARE and that the party providing the THIRD PARTY SOFTWARE is responsible for any warranty or liability related to or arising from the THIRD PARTY SOFTWARE. Yamaha is not responsible in any way for the THIRD PARTY SOFTWARE or your use thereof.
- Yamaha provides no express warranties as to the THIRD PARTY SOFTWARE. IN ADDITION, YAMAHA EXPRESSLY DISCLAIMS ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, as to the THIRD PARTY SOFTWARE.
- Yamaha shall not provide you with any service or maintenance as to the THIRD PARTY SOFTWARE.
Yamaha is not liable to you or any other person for any damages, including, without limitation, any direct, indirect, incidental or consequential damages, expenses, lost profits, lost data or other damages arising out of the use, misuse or inability to use the THIRD PARTY SOFTWARE.
U.S. GOVERNMENT RESTRICTED RIGHTS NOTICE:
The Software is a “commercial item,” as that term is defined at 48 C.F.R. 2.101 (Oct 1995), consisting of “commercial computer software” and “commercial computer software documentation,” as such terms are used in 48 C.F.R. 12.212 (Sept 1995). Consistent with 48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.72024 (June 1995), all U.S. Government End Users shall acquire the Software with only those rights set forth herein.
8. GENERAL
This Agreement shall be interpreted according to and governed by Japanese law without reference to principles of conflict of laws. Any dispute or procedure shall be heard before the Tokyo District Court in Japan. If for any reason a court of competent jurisdiction finds any portion of this Agreement to be unenforceable, the remainder of this Agreement shall continue in full force and effect. All legal notices, notice of disputes and demands for arbitration, and any other notice which purports to change these provisions or to assert legal entitlements must be sent in writing to:
Yamaha Corporation
10-1, Nakazawa-cho, Naka-ku, Hamamatsu, Shizuoka, 430-8650, Japan
9. ENTIRE AGREEMENT
This Agreement constitutes the entire agreement between the parties with respect to use of the SOFTWARE and any accompanying written materials and supersedes all prior or contemporaneous understandings or agreements, written or oral, regarding the subject matter of this Agreement.
10. AMENDMENT
Yamaha may amend, revise or update this Agreement at its discretion. Any change or update that Yamaha makes to this Agreement will be effective after you agree with the updated terms of this Agreement or use this SOFTWARE.
Last updated :January 28, 2020