DME64N, DME24N Procesadores de Mezcla Digital

		DME64N	DME24N
General specifications
Internal processing		32bit	32bit
Sampling frequency rate	Internal	44.1kHz, 48kHz, 88.2kHz, 96kHz	44.1kHz, 48kHz, 88.2kHz, 96kHz
Sampling frequency rate	External	44.1kHz/88.2kHz (-10%) - 48kHz/96kHz (+6%)	44.1kHz/88.2kHz (-10%) - 48kHz/96kHz (+6%)
Signal delay		Less than 0.85 ms (MY8-AD96 to MY8-DA96)	Less than 0.5 ms
Dynamic range		DA: 106 dB	DA: 106dB; AD+DA: 106dB
Crosstalk		-80 dB	-80 dB
Power requirements		Depend on area of purchase; AC100V, 120V or 220-240V; 50/60Hz	Depend on area of purchase; AC100V, 120V or 220-240V; 50/60Hz
Power consumption		80W	75W
Dimensions	W	480mm; 18-7/8in	480mm; 18-7/8in
	H	145mm; 5-3/4in (3U)	101mm; 4in (2U)
	D	411.5mm; 16-1/4in	411.5mm; 16-1/4in
Net weight		9.5kg; 20.9lbs	8kg; 17.6lbs
Accessorios		Owner's manual, DME Designer Installation Guide, AC power cord, AC plug clamp, 2x 16-pin Euroblock plug, 4x 8-pin Euroblock plug	Owner's manual, DME Designer Installation Guide, AC power cord, AC plug clamp, 16x 3-pin Euroblock plug
Total harmonic distortion		-	Less than 0.05% (20Hz-40kHz)
Frequency response		-	0, +0.5, -1.5dB 20Hz-40kHz
Hum & noise level	Equivalent input noise	-	-128dBu
Hum & noise level	Residual output noise	-	-82dBu
Outline
I/O	Mic inputs	-	8 (Remote HA)
	Phantom power	-	+48V DC; ON/OFF: per channel
	AD converter	-	24-bit; 128-time over sampling
	Line outputs	-	8
	DA converter	-	24-bit; 128-time over sampling

Analog input characteristics (DME24N)

Input terminal		Actual load impedance	For use with nominal	Input level		Connector
	GAIN	Actual load impedance	For use with nominal	Nominal	Max. before clip	Connector
CH INPUT 1-8	-58dB +10dB	3kohms	50-600ohm Mics & 600ohm Lines	-58dBu	-38dBu	Euroblock
CH INPUT 1-8	-58dB +10dB	3kohms	50-600ohm Mics & 600ohm Lines	+10dBu	+30dBu	Euroblock

Output terminal	Actual load impedance	For use with nominal	Output level		Connector
Output terminal	Actual load impedance	For use with nominal	Nominal	Max. before clip	Connector
OUTPUT 1-8	75ohms	600ohm Lines	+4dBu -2dBu	+24dBu +18dB	Euroblock
PHONES	15ohms	8ohms	75mW	150mW	Stereo Phone
PHONES	15ohms	40ohms	65mW	150mW	Stereo Phone

Terminal	From	Format	Level	IN/OUT	Connector
CASCADE IN	PM5D	-	RS422	32(IN)	D-sub Half Pitch Connector 68Pin (female)
CASCADE IN	DME64N	-	RS422	32(IN/OUT)	D-sub Half Pitch Connector 68Pin (female)
CASCADE OUT	PM5D	-	RS422	32(IN)	D-sub Half Pitch Connector 68Pin (female)
CASCADE OUT	DME64N	-	RS422	32(IN/OUT)	D-sub Half Pitch Connector 68Pin (female)

Terminal		Format	Level	Connector
USB		USB1.1	0V-3.3V	B type USB Connector
MIDI	IN	MIDI	-	DIN-5pin
	OUT	MIDI	-	DIN-5pin
	THRU	MIDI	-	DIN-5pin
WORD CLOCK	IN	-	TTL/75ohms(terminated)	BNC
WORD CLOCK	OUT	-	TTL/75ohms	BNC
GPI	IN	-	0V-5V	Euroblock
	OUT	-	TTL	Euroblock
	+V	-	5V	Euroblock
REMOTE		-	RS232C	D-sub 9pin(male)
REMOTE		-	RS422	D-sub 9pin(male)
ETHERNET		Ethernet	-	RJ45