Serie MGP Consola de mezclas

MGP32X MGP24X MGP16X MGP12X
Mixing capability Mixing channels 32 Line Inputs (24 mono and 4 stereo) 24 Line Inputs (16 mono and 4 stereo) 16 Line Inputs (8 mono and 4 stereo) 12 Line Inputs (4 mono and 4 stereo)
GROUP 4 GROUP Buses + ST Bus 4 GROUP Buses + ST Bus 4 GROUP Buses + ST Bus 4 GROUP Buses + ST Bus
AUX 6 AUX Sends + 2 FX Sends 6 AUX Sends + 2 FX Sends 2 AUX Sends + 2 FX Sends 2 AUX Sends + 2 FX Sends
MATRIX 1 Matrix out 1 Matrix out - -
On-board processors FX1:REV-X(8 PROGRAM, PARAMETER control)/ FX2:SPX(16 PROGRAM, PARAMETER control) FX1:REV-X(8 PROGRAM, PARAMETER control)/ FX2:SPX(16 PROGRAM, PARAMETER control) FX1:REV-X(8 PROGRAM, PARAMETER control), FX2:SPX (16 PROGRAM, PARAMETER control) FX1:REV-X(8 PROGRAM, PARAMETER control), FX2:SPX (16 PROGRAM, PARAMETER control)
Input channel functions - - Compressor CH1-8,HPF(100Hz 12dB/oct), CH EQ(MONO) ±15dB(Max.):High 8kHz shelving/ Mid 250Hz-5kHz peaking(CH1-8,13-16)/ Low 125Hz shelving, CH EQ(STEREO) ±15dB(Max.):High 8kHz shelving/ Mid 2.5kHz peaking(CH9-12)/ Low 125Hz shelving Compressor CH1-4,HPF(100Hz 12dB/oct), CH EQ(MONO) ±15dB(Max.):High 8kHz shelving/ Mid 250Hz-5kHz peaking(CH1-4,9-12)/ Low 125Hz shelving, CH EQ(STEREO) ±15dB(Max.):High 8kHz shelving/ Mid 2.5kHz peaking(CH5-8)/ Low 125Hz shelving
I/O Mic inputs MIC: 24 (INPUTS HPF: 100Hz 12dB/oct) MIC: 16 (INPUTS HPF: 100Hz 12dB/oct) MIC: 10 MIC:6 (100Hz 12dB/oct)
Phantom power 48V phantom power per channel 48V phantom power per channel 48V phantom power per channel 48V phantom power per channel
Line inputs LINE: 24 mono + 4 stereo, CH INSERT: 24 RETURN: 1 stereo LINE: 16 mono + 4 stereo, CH INSERT: 16 RETURN: 1 stereo LINE: 8mono+4stereo, CH INSERT: 8, RETURN: 1stereo, 2TR IN: 1 stereo LINE: 4mono+4stereo, CH INSERT IN: 4, RETURN: 1stereo, 2TR IN: 1 stereo
Digital I/O USB Device, iPod / iPhone USB Device, iPod / iPhone USB Audio USB IN: iPod, iPhone exclusive USB Audio USB IN: iPod, iPhone exclusive
Total harmonic distortion 0.02% (20Hz-20kHz@ +14dBu) 0.02% (20Hz-20kHz@ +14dBu) 0.02% (20Hz-20kHz@ +14dBu) 0.02% (20Hz-20kHz@ +14dBu)
Frequency response +0.5/-1.0dB 20Hz - 20kHz, refer to the nominal output level @1kHz +0.5/-1.0dB 20Hz - 20kHz, refer to the nominal output level @1kHz +0.5/-1.0dB 20Hz - 20kHz, refer to the nominal output level @1kHz +0.5/-1.0dB 20Hz - 20kHz, refer to the nominal output level @1kHz
Hum & noise level Equivalent input noise -128 dBu Equivalent Input Noise -128 dBu Equivalent Input Noise -128 dBu (20Hz–20 kHz, Rs=150Ω, Input Gain = Maximum) -128 dBu (20Hz–20 kHz, Rs=150Ω, Input Gain = Maximum)
Residual output noise -92 dBu Residual Output Noise -92 dBu Residual Output Noise -102 dBu (20Hz–20 kHz, Rs=150Ω, Input Gain = Maximum) -102 dBu (20Hz–20 kHz, Rs=150Ω, Input Gain = Maximum)
Crosstalk -74dB @ 1kHz -74dB @ 1kHz -74dB @ 1kHz -74dB @ 1kHz
Power requirements 100-240V 50Hz/60Hz 100-240V 50Hz/60Hz 100-240V 50Hz/60Hz 100-240V 50Hz/60Hz
Power consumption 86W max 86W max 55W max 45W max
Dimensions W 1,027mm (40.4") 819mm (32.2") 447mm 348mm
H 169mm (6.7") 169mm (6.7") 143mm 143mm
D 565mm (22.2") 565mm (22.2") 495mm 495mm
Net weight 19kg (41.9lb) 15.5kg (34.2lb) 9.0kg 7.5kg

Analog Input Specifications

Input Terminal Actual Source Impedance For Use With Nominal Input Level Connector
  PAD GAIN Sensitivity *1 Nominal Max. before clip
MONO CH INPUT
MGP32X: 1–24
MGP24X: 1–16
0 -60dB 3kΩ 50-600Ω Mics -80 dBu
(0.078 mV)
-60 dBu
(0.775 mV)
-40 dBu
(7.75 mV)
XLR-3-31 type *2
Phone jack *4
-16dB -36 dBu
(12.3 mV)
-16 dBu
(123 mV)
+4 dBu
(1.23 V)
26dB -34dB 600Ω Lines -54 dBu
(1.55 mV)
-34 dBu
(15.5 mV)
-14 dBu
(155 mV)
Phone jack *3
+10dB -10 dBu
(245 mV)
+10 dBu
(2.45 V)
+30 dBu
(24.5 V)
STEREO CH INPUT
MGP32X: 25–32
MGP24X: 17–24
-34dB 10kΩ 600Ω Lines -54 dBu
(1.55 mV)
-34 dBu
(15.5 mV)
-14 dBu
(155 mV)
Phone jack *4
RCA Pin Jack
+10dB -10 dBu
(245 mV)
+10 dBu
(2.45 V)
+30 dBu
(24.5 V)
MONO CH INSERT INPUT
MGP32X: 1–24
MGP24X: 1–16
10kΩ 600Ω Lines -20 dBu
(77.5 mV)
0 dBu
(0.775 V)
+20 dBu
(7.75 V)
Phone Jack *5
ST CH INSERT INPUT L,R 10kΩ 600Ω Lines -20 dBu
(77.5 mV)
0 dBu
(0.775 V)
+20 dBu
(7.75 V)
Phone Jack *5
TALKBACK INPUT 10kΩ 50-600Ω Mics -66 dBu
(0.389 mV)
-50 dBu
(2.45 mV)
-30 dBu
(24.5 mV)
XLR-3-31 type *6

0 dBu is referenced to 0.775 Vrms. 0 dBV is referenced to 1 Vrms.
*1 Sensitivity is the lowest level that will produce an output of +4 dB (1.23 V), or the nominal output level when the unit is set to maximum level. (all faders and level controls are at maximum position.)
*2 XLR-3-31 type connectors are balanced .(1=GND, 2=HOT, 3=COLD)
*3 Phone Jacks are balanced. (Tip=HOT, Ring=COLD, Sleeve=GND)
*4 Phone Jacks are unbalanced.
*5 Phone Jacks are unbalanced.(Tip=Out, Ring=In, Sleeve=GND)
*6 XLR-3-31 type connectors is unbalanced.

Analog Output Specifications

Output Terminal Actual Source Impedance For Use With Nominal Output Level Connector
Nominal Max. before clip
ST OUT [L,R] 75Ω 600Ω Lines +4 dBu
(1.23 V)
+24 dBu
(12.3 V)
XLR3-32 type *1
Phone jack *4
MONO OUT 75Ω 600Ω Lines +4 dBu
(1.23 V)
+24 dBu
(12.3 V)
XLR3-32 type *1
GROUP OUT (1-4) 150Ω 10kΩ Lines +4 dBu
(1.23 V)
+20 dBu
(7.75 V)
Phone jack *2
AUX SEND (1-6) 75Ω 600Ω Lines +4 dBu
(1.23 V)
+24 dBu
(12.3 V)
XLR3-32 type *1
MATRIX OUT (1, 2) 150Ω 10kΩ Lines +4 dBu
(1.23 V)
+20 dBu
(7.75 V)
Phone jack *2
MONO CH INSERT OUT
MGP32X: 1–24
MGP24X: 1–16
75Ω 10kΩ Lines 0 dBu
(0.775 V)
+20 dBu
(7.75 V)
Phone jack *3
ST CH INSERT OUT [L,R] 75Ω 10kΩ Lines 0 dBu
(0.775 V)
+20 dBu
(7.75 V)
Phone jack *3
MONITOR OUT [L,R] 150Ω 10kΩ Lines +4 dBu
(1.23 V)
+20 dBu
(7.75 V)
Phone jack *2
PHONES OUT 150Ω 40Ω Phones 3mW 75mW ST Phone Jack

0 dBu=0.775 Vrms, 0 dBV=1 Vrms
*1 XLR-3-32 type connectors are balanced. (1=GND, 2=HOT, 3=COLD)
*2 Phone jacks are impedance balanced. (Tip=HOT, Ring=COLD, Sleeve=GND)
*3 Phone jacks are unbalanced. (Tip=Out, Ring=In, Sleeve=GND)
*4 Phone jacks are balanced. (Tip=HOT, Ring=COLD, Sleeve=GND)