| 100V models |
| Output power; 20Hz-20kHz |
70V line |
200W x 2, RL=50ohms |
| 100V line |
200W x 2, RL=25ohms |
| 120V models |
| Output power; 20Hz-20kHz |
70V line |
200W x 2, RL=50ohms |
| 100V line |
200W x 2, RL=25ohms |
| 230V models |
| Output power; 20Hz-20kHz |
70V line |
200W x 2, RL=50ohms |
| 100V line |
200W x 2, RL=25ohms |
| 240V models |
| Output power; 20Hz-20kHz |
70V line |
200W x 2, RL=50ohms |
| 100V line |
200W x 2, RL=25ohms |
| General specifications |
| Total harmonic distortion |
Less than 0.1% (40Hz-20kHz; Halfpower), RL=4ohms |
| Intermodulation distortion |
Less than 0.1% (60Hz:7kHz=4:1; Halfpower) |
| Frequency response |
+0dB, -0.5dB (HPF=40Hz, 80Hz~20kHz) |
| S/N ratio |
More than 103dB (DIN AUDIO) |
| Hum & noise level |
Residual output noise |
Less than -65dBu |
| Crosstalk |
Less than -60dB |
| Voltage gain |
38dB (100V), 35dB (70V) |
| Input sensitivity |
+4dBu |
| Maximum input voltage |
+22dBu |
| I/O Connectors |
Line input / output ports |
2x Euroblock |
| Speaker output ports |
2x Barrier strip |
| Control ports |
D-sub 15pin |
| Processors |
HPF (40Hz/ 80Hz, 12dB/oct) |
| Protection circuit |
Load protection |
Power switch on/off mute, DC-fault (Output relay off; Restored automatically), Clip limiting (THD ≥ 0.5%) |
| Amplifier protection |
Thermal (Mute the output; heatsink temp ≥ 90°C; return automatically), VI limiter (Limit the output, RL ≤ 16ohms) |
| Power supply protection |
Thermal (Amplifier shuts down automatically, Operation not restored automatically; heatsink temp ≥ 90°C) |
| Amplifier class |
EEEngine |
| Cooling |
Variable-speed fan |
| Power requirements |
Depend on area of purchase; 100V, 120V, 230V or 240V; 50/60Hz |
| Power consumption |
Music source equivalent |
400W |
| Idling |
40W |
| Stand-by |
5W |
| Dimensions |
W |
480mm; 18-7/8in |
| H |
88mm; 3-7/16in (2U) |
| D |
412mm; 16-1/4in |
| Net weight |
9.8kg; 21.6lbs |
| Accessorios |
Owner’s manual, AC power cable, Security cover, 4x 3-pin Euroblock connector |
